ZS CONTROL according to Machinery Directive 2006/42/EC
(CE conformity only in conjunction with 3-sided access guard) Based on a safety PLC, it extends the ES control system:

a) Full operability via HMI
Multilingual menu

b) Setup mode
When the two-hand buttons are pressed simultaneously (0.5 s), the press moves down.

After reaching bottom dead center, the press remains there until the two-hand buttons are pressed again.

c) Two-hand operation with hold time
When the two-hand buttons are pressed simultaneously (0.5 s), the press moves down. If a "tool closed" sensor is installed,
the buttons can be released after reaching bottom dead center. The press remains at bottom dead center until an adjustable
hold time has elapsed and then automatically moves back up. The "tool closed" sensor according to EN 16092-4 2020:12 is included.
The customer must install it in the tool so that it is activated when the tool is closed. The sensor is dynamically monitored.

d) Electronic preset counter
Each press stroke is counted; the counter can also process target quantities.

e) External start enable
e.g., for checking whether a component is present

f) 8 additional ports (connection as input or output
e.g., for connecting a light curtain, protective enclosure, force-displacement measuring system,
additional sensors, etc.) Acknowledgement is performed via an additional button on the HMI.
OK and NOK signals can be evaluated during the production process.